Osciloskop U3P100 pamäťový 1Gs 2Gbit 2. kanál USB3 DSCOPE aj pre firmy

Špičkový měřící přístroj - osciloskop s vynikajícím frekvenčním 100MHz, vzorkovacím rozsahem 1Gs a extrémní pamětí 2Gbit pro vzorky. Nejlepší, co lze na současném trhu získat. Špičkový software s intuitivním ovládáním. Vč. kompletního SW pro PC i NB XP,WIN7-W10.

Faktura od CZ5710080893 vč. DPH, umožňující firmám - platcům DPH odpočet 21 proc. DPH. DIČ kupujícího je třeba zaslat předem, pozdější úprava dokladu není možná.

Key Features:

2 analog channels

USB 3.0 interface (5 Gbit/s.)

100MHz bandwidth

Up to 1GSa/s sample rate

Up to 2Gbits hardware memory

Ultra-portable size

Unibody aluminum case

Main Type-C USB 3.0 interface

Auxiliary Type-C USB interface

BNC connectors (Standard Probe Interface)

Extension interface (Pogo Pin Connector)Power SourcePower source voltage: 5VDC±5%

Power consumption: 4W maximumInput output ports

Direction Descriptions Protected Voltage Range

USB 3.0 port InOut Connect to host computer 4.75v ~ 5.25v

Auxiliary USB power port Input Auxiliary power 4.5v ~ 5.5v

BNC connectors Input Connect to probes -100v ~ +100v (DC+AC)

Extension interface InOut Extension probes and module 0-3.3v

Probe compensator Output 3v // ~1KHz square wave —Designed to make your work enjoyableDSCope U3P100 is an USB-based digital oscilloscope, which has a portable size (115x74x16mm), but powerful performance (up to 1GHz sample rate, USB 3.0 interface). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the analog wave and its frequency spectrum at anywhere and anytime.Technical SpecificationsVertical systemBandwidth: 100MHz

Input coupling: DC or AC

Input impedance: 1MΩ // ~16pF

Input sensitivity range: 10mV/Div to 2V/Div

Vertical resolution: 8bits

Maximum input voltage: peaks ≤ ±100V

DC gain accuracy: ±6%

Vertical position range: ±5 divisions

Vertical offset ranges: Volts/Div setting                   Offset rang

10mV/Div ~ 2V/Div                         ±100mV ~ ±20V/Div

Common mode rejection ratio(CMRR): —

Channel-to-channel isolation: Horizontal systemMaximum sample rate(single channel): 1GSa/s

Maximum sample rate(dual channel): 500MSa/s

Time base range: 2ns/Div to 10s/Div

Maximum duration of time

captured at highest sample rate (all channels): 2ms (real-time capture)

200ms (single capture)

Record Length (real-time capture): 1M (2 channels enabled)

2M (1 channel enabled)

Record Length (single capture): 128M (2 channels enabled)

256M (1 channel enabled)Trigger systemTrigger mode: Auto

Normal (ch0, ch1, ch0 & ch1, ch0 || ch1)

Trigger position range: 1% ~ 99% of record length

Trigger holdoff range: 1 us ~ 10 s

Trigger types: Edge (rising or falling)

Sensitivity: 0 ~ 0.625 vertical division

Trigger level ranges: ±4.4 vertical division from center screenWaveform measurementsCursors: Horizontal Width/Frequency/Period/Duty

Vertical Amplitude

Automated measurements: Frequency / Period / +Duty /- Duty / +Count

Rise / Fall / +Width / -Width / BrstW

Amplitude / High / Low / RMS / Mean

Pk-Pk / Max / Min / +Over / -OVerWaveform mathFFT: Spectrum magnitude

Length: 1K ~ 16K

Vertical scale: Linear RMS or DBV RMS

Window: Rectangle, Hann, Hamming, Blackman, Flat_top

Math: Add / Subtract / Multiply / DivideWaveform displayTime domain: Real-time viewSingle capture view

X-Y mode: Lissajous FigureSystem RequirementsWindows XP, Vista, Win7, Win8 & Win10

Mac OS X 10.12 or above

Linux: recent Ubuntu, Fedora, Arch, etc.

USB 3.0 Host portWhat’s in the BoxDSCope U3P100 (fully tested)

x2 USB 3.0 cable(1.0m length, A to Type-C)

x2 P2200 probes

x1 Carrying Case

Špičkový měřící přístroj - osciloskop s vynikajícím frekvenčním 100MHz, vzorkovacím rozsahem 1Gs a extrémní pamětí 2Gbit pro vzorky. Nejlepší, co lze na současném trhu získat. Špičkový software s intuitivním ovládáním. Vč. kompletního SW pro PC i NB XP,WIN7-W10. Faktura od CZ5710080893 vč. DPH, umožňující firmám - platcům DPH odpočet 21 proc. DPH. DIČ kupujícího je třeba zaslat předem, pozdější úprava dokladu není možná. Key Features: 2 analog channels USB 3.0 interface (5 Gbit/s.) 100MHz bandwidth Up to 1GSa/s sample rate Up to 2Gbits hardware memory Ultra-portable size Unibody aluminum case Main Type-C USB 3.0 interface Auxiliary Type-C USB interface BNC connectors (Standard Probe Interface) Extension interface (Pogo Pin Connector)Power SourcePower source voltage: 5VDC±5% Power consumption: 4W maximumInput output ports Direction Descriptions Protected Voltage Range USB 3.0 port InOut Connect to host computer 4.75v ~ 5.25v Auxiliary USB power port Input Auxiliary power 4.5v ~ 5.5v BNC connectors Input Connect to probes -100v ~ +100v (DC+AC) Extension interface InOut Extension probes and module 0-3.3v Probe compensator Output 3v // ~1KHz square wave —Designed to make your work enjoyableDSCope U3P100 is an USB-based digital oscilloscope, which has a portable size (115x74x16mm), but powerful performance (up to 1GHz sample rate, USB 3.0 interface). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the analog wave and its frequency spectrum at anywhere and anytime.Technical SpecificationsVertical systemBandwidth: 100MHz Input coupling: DC or AC Input impedance: 1MΩ // ~16pF Input sensitivity range: 10mV/Div to 2V/Div Vertical resolution: 8bits Maximum input voltage: peaks ≤ ±100V DC gain accuracy: ±6% Vertical position range: ±5 divisions Vertical offset ranges: Volts/Div setting Offset rang 10mV/Div ~ 2V/Div ±100mV ~ ±20V/Div Common mode rejection ratio(CMRR): — Channel-to-channel isolation: Horizontal systemMaximum sample rate(single channel): 1GSa/s Maximum sample rate(dual channel): 500MSa/s Time base range: 2ns/Div to 10s/Div Maximum duration of time captured at highest sample rate (all channels): 2ms (real-time capture) 200ms (single capture) Record Length (real-time capture): 1M (2 channels enabled) 2M (1 channel enabled) Record Length (single capture): 128M (2 channels enabled) 256M (1 channel enabled)Trigger systemTrigger mode: Auto Normal (ch0, ch1, ch0 & ch1, ch0 || ch1) Trigger position range: 1% ~ 99% of record length Trigger holdoff range: 1 us ~ 10 s Trigger types: Edge (rising or falling) Sensitivity: 0 ~ 0.625 vertical division Trigger level ranges: ±4.4 vertical division from center screenWaveform measurementsCursors: Horizontal Width/Frequency/Period/Duty Vertical Amplitude Automated measurements: Frequency / Period / +Duty /- Duty / +Count Rise / Fall / +Width / -Width / BrstW Amplitude / High / Low / RMS / Mean Pk-Pk / Max / Min / +Over / -OVerWaveform mathFFT: Spectrum magnitude Length: 1K ~ 16K Vertical scale: Linear RMS or DBV RMS Window: Rectangle, Hann, Hamming, Blackman, Flat_top Math: Add / Subtract / Multiply / DivideWaveform displayTime domain: Real-time viewSingle capture view X-Y mode: Lissajous FigureSystem RequirementsWindows XP, Vista, Win7, Win8 & Win10 Mac OS X 10.12 or above Linux: recent Ubuntu, Fedora, Arch, etc. USB 3.0 Host portWhat’s in the BoxDSCope U3P100 (fully tested) x2 USB 3.0 cable(1.0m length, A to Type-C) x2 P2200 probes x1 Carrying Case